Needles: 4 mm
Yarn:
150 g Arwetta by Filcolana (210 m/50 g)
150 g Bella by Permin (145 m/50 g)
Yardage is only an estimate because it varies depending on the size of laminas.
Gauge: 20-22 stitches in 10 cm
Back plate:
You can buy the back plate on Libekbh.com
If you want to make it yourself, you will need:
50X50 cm plywood 5 mm or similar
Jigsaw and drill
52X52 cm padding
Staple gun or tiny nails with large heads and a hammer
Spray glue if preffered
The bottom is knitted in garter stitch in Arwetta. The bottom is assembled with Kitchener stitches. On this bottom the lamellas are knitted in Bella inside the garter rows. The lamellas are also made in garter stitch and are shaped, with help from German short rows. Each lamella is knitted one by one, and you will break the yarn between each one. The ends go to the wrong side and is fastened before the blanket is mounted on the back plate.
Needles: 4 mm
Yarn:
150 g Arwetta by Filcolana (210 m/50 g)
150 g Bella by Permin (145 m/50 g)
Yardage is only an estimate because it varies depending on the size of laminas.
Gauge: 20-22 stitches in 10 cm
Back plate:
You can buy the back plate on Libekbh.com
If you want to make it yourself, you will need:
50X50 cm plywood 5 mm or similar
Jigsaw and drill
52X52 cm padding
Staple gun or tiny nails with large heads and a hammer
Spray glue if preffered
The bottom is knitted in garter stitch in Arwetta. The bottom is assembled with Kitchener stitches. On this bottom the lamellas are knitted in Bella inside the garter rows. The lamellas are also made in garter stitch and are shaped, with help from German short rows. Each lamella is knitted one by one, and you will break the yarn between each one. The ends go to the wrong side and is fastened before the blanket is mounted on the back plate.
